联系电话:13826656666 简体中文English

What are the taboos for using digital printing machines?

发布时间:2018-09-21浏览量:467

As a printing tool that can help rapid growth, digital printing machines have been widely used by manufacturers, but any machine should be used with care during use, so that the machine is always in the state and effectively maintain the service life of the machine.

So, in daily production, how should operators avoid the misunderstandings that would damage the machine? Next, there are a handful of manufacturers in the world that combine the development and manufacture of digital textile printing machines and digital textile printing inks. All-in-one digital brings you the urgent need to make employees digital printing machines!

河北11选5开奖1。 It is forbidden to switch circuits at will。

河北11选5开奖In the process of using the digital printing machine, it is strictly forbidden to install and disassemble the circuit of the digital printing machine without turning off the power and turning off the main power. Because such behavior is very uniform and damages the service life of each system.

2, the use of inferior ink is prohibited

The printing effect of the digital printing machine is good, and the requirements for the ink are also high. If you change and add different batches, different brands or inferior inks and cleaning liquids at will. It is very likely that the color and quality of the ink will be changed, which will affect the effect of the printing. At the same time, it will easily cause the nozzle to clog and reduce the service life of the nozzle.

3。 It is forbidden to adjust the nozzle manually。

When the digital printing machine nozzle is adjusted for position or replacement, it must be handled carefully according to the specifications to avoid damage to the nozzle.

4。 Prohibit long-term soaking nozzles

河北11选5开奖When cleaning the nozzle, since the cleaning solution is corrosive, it is only necessary to take an appropriate amount of the introduction nozzle for cleaning. It is forbidden to soak the nozzle for a long time in the cleaning solution to avoid affecting the nozzle orifice, thereby reducing the service life of the nozzle.

河北11选5 韩国1.5分彩平台 盛通彩票网 澳洲幸运20注册 河北11选5走势图 极速3D彩票 极速快3 北京28预测 河北11选5和值分布 天津11选5走势图